| HOME - NEWS |
| |
| Capacity for 60,000cbm/year Particle Board Production Line |
Particle board is made from small-diameter wood, branches,wood residues and non-wood agricultural residues via chip preparation, drying, spreading and hot press section. Finished boards can be used for furniture, building, packing, vehicle and sheep decoration and lamination.
|
| |
If you need and are interested in our machines, please contact us.
WhatsApp/ WeChat/ Mobile: 0086-139 5619 9239
E-mail: sumtoinfo@163.com |
| |
| |
Raw Material |
Wood branch, Waste wood |
|
Capacity |
60,000cbm/year |
|
| |
Board Size |
4×8ft×( 8~25mm) |
|
Working days |
300days, 22h/ day |
|
|
| |
1) Chip preparation section
Raw material is reduced into qualified chips by the drum chipper, then the chips are transported to the chip bin, and then feed to the knife-ring flaker by which the chips are turned to flakes,then the flake stored in wet flake bin.
|
 |
|
Drum Chipper: 2 Sets
BX218D
Capacity: 38cbm/h
Main motor: 132kw
Overall dimension: 6153×2120×1510mm
|
|
| |
|
|
Knife-ring Flaker: 1 Set
BX4612
Capacity:3000kg/h
Power: 200kw
|
|
|
 |
| |
|
|
2) Drying and sifting section
The flsker discharged from the wet flake bin are conveyed to the rotary dryer. Qualified core flakes are stored in core flake bin; oversize flakes are send to mill to be re-crushing, and transported to surface flake bin.
|
 |
|
Three Pass Hot Air Dyer: 1 Set
Ф3300×22000mm
Initial moisture: 50%;
Final moisture: ≤3%;
Rotation speed of roller: 3~11r/min
|
|
| |
|
|
Glue Blender: 2 Sets
Diameter: 600mm
Length: 3000mm
Motor: 45kw
|
|
|
 |
| |
|
|
3) Forming and hot-pressing section
The surface and core flakes are sent into classi-forming machine, and forming on the mat conveyor uniformly. After process of metal remover , pre-press, lengthwise saw, cross saw, accelerate conveyor,scaling conveyor , storing conveyor and loading conveyor,mats are transported to carrier and then to hot pressing. Rough boards after pressing are pushed to unloader via pallet.
|
 |
|
Diamond Forming Machine: 1 Sets
Forming width:1350mm
Forming Head: 3 Heads
|
|
| |
|
|
Multi Roller Pre-press: 1 Set
4500x3500x2200mm
Working pressure:10MP
Linear pressure:200N/cm
|
|
|
 |
| |
|
|
4) Cooling and sizing section
The rough board is conveyed to star-cooler for cooling ,then the rough board goes through side trimming saw and become a qualified particle-board, stacked on the hydraulic lift.
|
 |
|
 |
| |
|
|
5) Sanding section
The board are sanded,checked and stored. PLC control is used in mat-forming section. |
| |
| |
|
|
| Recommended Reading |
|
| Video Showing |
|
